LogoLogo
DocumentationPayloadsCommunitySupport
  • Packet Squirrel Mark II by Hak5
  • Setup
    • Connecting the Packet Squirrel
    • Setting up the Packet Squirrel
  • Getting Started
    • Changes & New features
    • Packet Squirrel Basics
    • Accessing the Packet Squirrel
    • Web UI
    • Getting the Packet Squirrel online
    • Status LED
    • Cloud C²
    • USB storage support
    • Selecting and editing payloads
    • Configuring payloads
    • Running payloads
    • Networking and modes
  • Networking Tutorial
    • Glossary
    • OSI layers
    • Private IP ranges
    • Network masks
    • Packet injection
    • Translation and redirection
    • Packet capture
  • Payload Development
    • Payload development basics
    • DuckyScript for Packet Squirrel
      • BUTTON
      • C2EXFIL
      • C2NOTIFY
      • C2WATCHDIR
      • DYNAMICPROXY
      • KILLPORT
      • KILLSTREAM
      • LED
      • MATCHPORT
      • MATCHSTREAM
      • NETMODE
      • SELFDESTRUCT
      • SSH_START
      • SSH_STOP
      • SPOOFDNS
      • SWITCH
      • UI_START
      • UI_STOP
      • USB_FREE
      • USB_STORAGE
      • USB_WAIT
  • Advanced payloads
    • Quotes and expansions
    • Flow control
    • Redirecting output
    • Payload configuration
    • Return codes & success
    • Background commands
    • Command groups
    • Processing JSON
    • USB encryption
    • VPN configuration
    • Network manipulation
    • Tips, tricks, & pitfalls
    • Python
  • Payload repository
  • Troubleshooting
    • Troubleshooting networking
    • Troubleshooting payloads
    • Factory reset
  • Software Updates
    • Upgrading firmware
Powered by GitBook
On this page
  • Mode switch
  • Selected at boot
  • Quick rebooting

Was this helpful?

  1. Getting Started

Running payloads

Run, payload, run!

Last updated 1 year ago

Was this helpful?

Mode switch

The Mode Switch determines what payload will be run.

On boot the Packet Squirrel will run the selected payload, or enter Arming Mode.

Selected at boot

The payload is selected when the Packet Squirrel boots.

Changing the position of the Mode Switch will not change payloads until you reboot.

Quick rebooting

Reboot the Packet Squirrel automatically by holding down the pushbutton at the top of the device for 5-10 seconds.

Alternately, you can simply unplug the Packet Squirrel and plug it in again to reboot it.

Packet Squirrel mode switch