WiFi Pineapple - 6th Gen: NANO / TETRA
  • WiFi Pineapple NANO/TETRA
  • Getting Started
    • About the WiFi Pineapple NANO/TETRA
    • The WiFi Auditing Workflow
    • The PineAP Suite
    • The Web Interface
    • Upgrading the Firmware
  • Setup
    • Setup Basics
    • WiFi Pineapple NANO - Linux Setup
    • WiFi Pineapple NANO - Windows Setup
    • WiFi Pineapple TETRA - Linux Setup
  • Internet Connectivity
    • Internet Connectivity Basics
    • Internet Connection Sharing on Kali Linux
    • Internet Connection Sharing over Ethernet in Windows
    • Internet Connection Sharing over Ethernet in Linux
    • Wired Internet Connection
    • WiFi Client Mode
  • Console Access
    • Console Access Basics
    • Secure Shell
    • Serial Access - WiFi Pineapple TETRA
    • Working with PineAP from the CLI
  • Basics of WiFi Operation
    • Basics of WiFi Operation
    • Radios and Chipsets
    • Stations and Base Stations
    • Transmit Power
    • Channels and Regions
    • Protocols
    • Modes of Operation
    • Logical Configurations
    • MAC Address
    • Broadcast Address
    • Service Sets and Identifiers
    • Management Frames
    • Frame Types
    • Frames and Frame Structure
    • Frame Injection
    • Association States
  • FAQ / Troubleshooting
    • Serial Console on the WiFi Pineapple TETRA
    • Ethernet on the WiFi Pineapple TETRA
    • LED Status Indicators
    • Power Considerations
    • Factory Reset
    • Firmware Recovery
    • Manual Firmware Installation
  • Development
    • Legacy WiFi Pineapple Mark V Modules (Infusions)
    • Specifications and Power Considerations
    • WiFi Pineapple NANO/TETRA Module API - Introduction
    • WiFi Pineapple NANO/TETRA Module API - Authentication
    • WiFi Pineapple NANO/TETRA Module API - Modules
    • WiFi Pineapple NANO/TETRA Module API - module.php API
    • Creating WiFi Pineapple NANO/TETRA Modules
Powered by GitBook
On this page
  1. Internet Connectivity

Internet Connectivity Basics

The WiFi Pineapple may be used to provide WiFi clients with Internet access. While this may not be necessary for all deployment scenarios, it is commonly configured. There are four basic methods for setting up an Internet connection on the WiFi Pineapple.

  1. Wired Internet Connection

  2. Internet Connection Sharing

  3. USB Tethering

  4. WiFi Client Mode

These sections serve as guides to setting up a WiFi Pineapple Internet connection. However, please be advised that this guide cannot cover the infinite possible network configurations.

PreviousWiFi Pineapple TETRA - Linux SetupNextInternet Connection Sharing on Kali Linux

Last updated 3 years ago