WiFi Pineapple - 6th Gen: NANO / TETRA
  • WiFi Pineapple NANO/TETRA
  • Getting Started
    • About the WiFi Pineapple NANO/TETRA
    • The WiFi Auditing Workflow
    • The PineAP Suite
    • The Web Interface
    • Upgrading the Firmware
  • Setup
    • Setup Basics
    • WiFi Pineapple NANO - Linux Setup
    • WiFi Pineapple NANO - Windows Setup
    • WiFi Pineapple TETRA - Linux Setup
  • Internet Connectivity
    • Internet Connectivity Basics
    • Internet Connection Sharing on Kali Linux
    • Internet Connection Sharing over Ethernet in Windows
    • Internet Connection Sharing over Ethernet in Linux
    • Wired Internet Connection
    • WiFi Client Mode
  • Console Access
    • Console Access Basics
    • Secure Shell
    • Serial Access - WiFi Pineapple TETRA
    • Working with PineAP from the CLI
  • Basics of WiFi Operation
    • Basics of WiFi Operation
    • Radios and Chipsets
    • Stations and Base Stations
    • Transmit Power
    • Channels and Regions
    • Protocols
    • Modes of Operation
    • Logical Configurations
    • MAC Address
    • Broadcast Address
    • Service Sets and Identifiers
    • Management Frames
    • Frame Types
    • Frames and Frame Structure
    • Frame Injection
    • Association States
  • FAQ / Troubleshooting
    • Serial Console on the WiFi Pineapple TETRA
    • Ethernet on the WiFi Pineapple TETRA
    • LED Status Indicators
    • Power Considerations
    • Factory Reset
    • Firmware Recovery
    • Manual Firmware Installation
  • Development
    • Legacy WiFi Pineapple Mark V Modules (Infusions)
    • Specifications and Power Considerations
    • WiFi Pineapple NANO/TETRA Module API - Introduction
    • WiFi Pineapple NANO/TETRA Module API - Authentication
    • WiFi Pineapple NANO/TETRA Module API - Modules
    • WiFi Pineapple NANO/TETRA Module API - module.php API
    • Creating WiFi Pineapple NANO/TETRA Modules
Powered by GitBook
On this page
  1. Console Access

Secure Shell

The most common way to access the WiFi Pineapple console is via Secure Shell (SSH). SSH clients are preinstalled on most Linux and Mac systems. Windows users are advised to download a SSH utility such as the popular PuTTY client. Android users may also find compatible SSH clients from Google Play.

To connect to the WiFi Pineapple console over SSH, first connect to the WiFi Pineapple network from your host device. Once connected, ssh to the WiFi Pineapple IP address (default: 172.16.42.1) with the username root and password configured on setup. This is the same password as used to access the web interface. The SSH service on the WiFi Pineapple operates at the default port 22.

ssh root@172.16.42.1

PreviousConsole Access BasicsNextSerial Access - WiFi Pineapple TETRA

Last updated 3 years ago