Shark Jack
  • The Shark Jack by Hak5
  • Getting Started
    • Shark Jack Basics
    • Default Settings
  • Beginner Guides
    • Unboxing and Setup
    • Using sharkjack.sh
    • Two Key Commands
    • Writing a Simple Payload
  • Software Updates
    • Manual Upgrade
    • Over-the-Air Upgrade
  • Writing Payloads
    • Payload Development Basics
    • The NETMODE Command
    • The LED Command
    • The SWITCH Command
    • The BATTERY Command
    • The SERIAL_WRITE Command
    • The Cloud C2 commands
    • Included Tools
  • Managing Payloads
    • The UPDATE_PAYLOADS Command
    • The LIST Command
    • The ACTIVATE Command
  • Troubleshooting
    • Firmware Recovery
  • Tips & Tricks
    • Charge the Shark Jack from your Phone
    • Using the Shark Jack with the Plunder Bug as a simple switch
    • Android Serial Setup for Shark Jack Cable
  • Product Information
    • Specifications
    • Important Safety Information and Warnings
Powered by GitBook
On this page
  • Shark Jack
  • Shark Jack Cable

Was this helpful?

  1. Product Information

Specifications

Shark Jack

SOC: MT7628DAN INTERFACE: Ethernet STANDARDS: 802.3 SIZE: 62 x 21 x 12 mm POWER: 2.5W (USB 5V 0.5A) BATTERY: 1S 401020 3.7V 50mAh 0.2W LiPo OPERATING TEMPERATURE: 35ºC ~ 45ºC STORAGE TEMPERATURE: -20ºC ~ 50ºC RELATIVE HUMIDITY: 0% to 90% (noncondensing)

Shark Jack Cable

SOC: MT7628DAN INTERFACE: Ethernet, USB UART (CP2102) STANDARDS: 802.3 SIZE: 62 x 21 x 12 mm POWER: 2.5W (USB 5V 0.5A) OPERATING TEMPERATURE: 35ºC ~ 45ºC STORAGE TEMPERATURE: -20ºC ~ 50ºC RELATIVE HUMIDITY: 0% to 90% (noncondensing)

Last updated 3 years ago

Was this helpful?