Shark Jack
  • The Shark Jack by Hak5
  • Getting Started
    • Shark Jack Basics
    • Default Settings
  • Beginner Guides
    • Unboxing and Setup
    • Using sharkjack.sh
    • Two Key Commands
    • Writing a Simple Payload
  • Software Updates
    • Manual Upgrade
    • Over-the-Air Upgrade
  • Writing Payloads
    • Payload Development Basics
    • The NETMODE Command
    • The LED Command
    • The SWITCH Command
    • The BATTERY Command
    • The SERIAL_WRITE Command
    • The Cloud C2 commands
    • Included Tools
  • Managing Payloads
    • The UPDATE_PAYLOADS Command
    • The LIST Command
    • The ACTIVATE Command
  • Troubleshooting
    • Firmware Recovery
  • Tips & Tricks
    • Charge the Shark Jack from your Phone
    • Using the Shark Jack with the Plunder Bug as a simple switch
    • Android Serial Setup for Shark Jack Cable
  • Product Information
    • Specifications
    • Important Safety Information and Warnings
Powered by GitBook
On this page

Was this helpful?

  1. Product Information

Important Safety Information and Warnings

The Shark Jack contains a Lithium-Polymer (LiPo) battery. Never leave near flammable material, liquids or in extreme temperatures as excessive heat, fire, damage and injury can occur. Never leave unattended while charging. Disconnect charger if battery becomes hot. Read all instructions before use.

Your device may get hot to the touch; this is normal. Unplug the device and let it cool before removing it. This device complies with applicable surface temperature standards and limits defined by the International Standard for Safety (IEC 60950-1). Still, sustained contact with warm surfaces for long periods of time may cause discomfort or injury. Keep the device in a well-ventilated area when in use. Allow for adequate air circulation under and around the device. Do not expose the device to water or extreme conditions (moisture, heat, cold, dust), as the device may malfunction or cease to work when exposed to such elements. Do not attempt to disassemble or repair the device yourself. Doing so voids the limited warranty and could harm you or the device. This device is not designed, manufactured or intended for use in hazardous environments requiring fail-safe performance in which the failure of the device could lead directly to death, personal injury, or severe physical or environmental damage.

Shark Jack is a trademark of Hak5 LLC. This product is packaged with a limited warranty, the acceptance of which is a condition of sale. See Hak5.org for additional warranty details and limitations. Availability and performance of certain features, services and applications are device and network dependent and may not be available in all areas; additional terms, conditions and/or charges may apply. All features, functionality and other product specifications are subject to change without notice or obligation. Hak5 LLC reserves the right to make changes to the products description in this document without notice. Hak5 LLC does not assume any liability that may occur due to the use or application of the product(s) described herein. Made in China. Designed in San Francisco by Hak5 LLC, 548 Market Street, #39371, San Francisco, CA, 94104. Hak5.org. The Shark Jack is a network administration and pentesting tool for authorized auditing and security analysis purposes only where permitted subject local and international laws where applicable. Users are solely responsible for compliance with all laws of their locality. Hak5 LLC and affiliates claim no responsibility for unauthorized or unlawful use. © Hak5 LLC.

Last updated 3 years ago

Was this helpful?