Startup Status:
- LIGHT CYAN (SHORT)
- Device received power, starting boot
- SOLID GREEN
- (After light cyan) Booting
- (After button push) SD is safe to eject
- BLINKING GREEN
- Waiting for capture to complete, ejecting SD card - DO NOT REMOVE SD CARD
- SOLID RED
- SD card full or not detected
Configuration Status:
- SOLID CYAN
- Wireless config unchanged on device/MicroSD
- BLINKING CYAN
- Updating device wireless to match MicroSD config.txt
- Updating device wireless state to match MicroSD config.txt
- Changing from wireless disabled -> wireless enabled
- Changing from wireless enabled -> wireless disabled
- SOLID MAGENTA
- Device button listening for capture override
- INVERSE BLINK MAGENTA
- Button pushed once during capture override mode at startup - config set to default image capture
- Button pushed twice during capture override mode at startup - config set to default video capture
Capture Status:
- SOLID BLUE
- Has video signal and capturing images to SD card
- SOLID YELLOW
- Has video signal and capturing video to SD card
- SOLID WHITE
- Has no video signal
Upgrade Status:
- BLUE/RED POLICE PATTERN - DO NOT REMOVE POWER OR SD CARD
- Screen Crab detected upgrade.bin on MicroSD card at boot - starting device upgrade
- BLUE/MAGENTA POLICE PATTERN - DO NOT REMOVE POWER OR SD CARD
- Screen Crab starting framework upgrade
- FOREVER BLINKING RED - only during device upgrade (following police pattern)
- Software Upgrade Failed