Find the Bash Bunny device from the terminal
ls /dev/tty*" or "dmesg | grep ttyUsually on a Linux host, the Bash Bunny will register as either /dev/ttyUSB0 or /dev/ttyACM0. On an OSX/macOS host, the Bash Bunny will register as /dev/tty.usbmodemch000001.
Next, connect to the serial device using screen, minicom or your terminal emulator of choice.If screen is not installed it can usually be found from your distributions package manager.
sudo apt-get install screenConnecting with screen
sudo screen /dev/ttyACM0 115200Disconnect with keyboard combo: CTRL+a followed by CTRL+\